FUNCTION_BLOCK E_SELECT
This is the E_SELECT function block type for selection between two events defined in Annex A of IEC 61499-1. Its operation is described by the ECC shown below.
ECC

Test Procedure
  1. Open and run events/E_SELECT in the FBDK.
  2. Enter data for the G input variable.
  3. Exercise the FB by clicking on the event inputs.
Last updated: 2016-04-22.
©2016 Holobloc Inc.
Reuse is permitted under the Academic Free License version 3.0
with attribution to http://www.holobloc.com/doc/navigator.htm