FUNCTION_BLOCK E_R_TRIG
This is the E_R_TRIG (rising edge detection) function block type defined in Annex A of IEC 61499-1. Its operation is defined by the diagram below.

Test Procedure
  1. Open and run events/E_R_TRIG in the FBDK.
  2. Exercise the FB by entering a value for the QI input variable and clicking on the EI event input.
Last updated: 2016-04-21.
©2016 Holobloc Inc.
Reuse is permitted under the Academic Free License version 3.0
with attribution to http://www.holobloc.com/doc/navigator.htm