FUNCTION_BLOCK E_REND
This is the function block type for rendezvous of two events as defined in Annex A of IEC 61499-1. See the ECC below for a definition of its operation.
ECC

Test Procedure
  1. Open and run events/E_REND in the FBDK.
  2. Check the operation of the FB against the ECC at left by clicking on the event inputs.
Last updated: 2016-04-20.
©2016 Holobloc Inc.
Reuse is permitted under the Academic Free License version 3.0
with attribution to http://www.holobloc.com/doc/navigator.htm